face roller burnishing tool
|
PRG face roller burnishing tool, from 1 mm dia. |
|
|
|
|
Technical data of PRG, from 1 mm dia. |
|
|
|
Technical data of PRG, from 1 mm dia. |
|
Machining |
|
Flat surfaces |
|
Diameter range |
|
from 1 mm |
|
Rollers |
|
according to requirement |
|
|
|
Cylinder shank (with clamping surface on request) or Morse taper |
|
|
|
|
|
Optional tool equipment |
|
-VDI, HSK etc. mounts |
|
|
|
-Inside cooling |
|
Use parameters to be used |
|
Workpiece oversize |
|
up to 0.01 mm |
|
Tool preclamping |
|
up to 4 mm |
|
Lubrication |
|
emulsion or oil; filtration of the lubricant (<40µm) can improve the surface quality and the tool life |
|
Pre-machining of workpiece |
|
Surface roughness up to 15 µm |
|
Maximum hardness of workpiece |
|
45HRC |
|
Speed |
|
up to 40 rpm |
|
Feed rate |
|
0.1 - 0.3 mm/rev;
Return traverse always in rapid traverse |
|
Dwell time under pressure |
|
5 - 20 rotations |
