Diamond combination tools

Technical Data

Diamond combination tools

Machining

generation of contours by cutting and Smoothing with a diamond tool

Standard mount

Cylinder shank or Morse taper

Optional tool equipment

- VDI, HSK etc. mounts

Use parameters to be used

Please note that this information represents guide values which must be adapted to the individual cases.

Speed

50-150m/min

Feed rate

0.05-0.15mm/rev

Workpiece oversize

0.01mm

Tool preclamping

0.01-0.02mm

Pre-machining of workpiece

Surface roughness up to 15 µm

Maximum hardness of workpiece

65HRC

Suitable for hard machining